Brand New End Mills From Iscar Can Enhance Productivity While Decreasing Costs

Producers and die & mold shops can exclude chatter problems in various milling operations with Iscar's brand new Chatterfree carbide end mills. The cutters' variable-pitch flute pattern omits harmonic vibration, the main source of chatter. This allows faster cutting and superior finish in rough or finish slotting, shoulder milling and cavity milling. In addition, users also report sustained edge life due to decreased chatter. The chatter-free feature is realizable in both solid carbide endmills and tips in Iscar's Multi-Master replaceable-tip family. Diameter range is 6 to 20mm for the solid carbide endmills, and 8 to 20mm for Multi-Master tips. These completely new endmills are ideal for lower power machines with ISO40 or BT40 adaptations. The solid carbide version can achieve full slot machining up to 2xD. Depth capability on the replaceable-tip version is more subdued since the active length is shorter. In full slotting applications on alloy steel, the solid carbide construction readily handles 0.03-0.05 feed rates at 180-220mm/min surface speed and 2xD depth of cut.

Finishred - Completely New Solid Carbide Endmills

Iscar is announcing the EFR.. B44 and the MM EFS.. Finishred a revolutionary solid carbide end mills family. The Finishred carbide endmill is a mixture of both roughing and finishing endmills in a single tool. Roughing endmills remove material from work pieces more briskly and proficiently than standard endmills. However, roughing endmills leave grooves on the machined surface. In consequence, after using a roughing endmill, a finishing endmill must to be used in order to attain a smooth surface finish. This means time-consuming tool change, setup time and inevitably of keeping two endmill types in the inventory.

Capabilities of the Finishred Endmills:

The EFR.. B44 and the MM EFS.. endmills feature 4 flutes with 45 degree helix, two serrated flutes and two continuous flutes.

The cutting edges of the finishing flutes are radially farther from the tool axis than the cutting edges of the serrated flutes. The finishing flutes leave out the grooves produced by the roughing flutes, leaving a constant surface finish.

The tool is fully functional and allows running at rough machining parameters, ending in finish surface quality.

The notable tool design reduces vibration at high load applications.

The tool creates short and long chips concurrently. This chip mixture is evacuated more readily than each individual chip type, an outstanding solution in slotting and cavity milling applications.

The Finishred is also featured with the Multi-Master indexable milling head selection which merges the Finishred includes with the advantage of little setup time, no regrinding costs and the comprehensive range of shank and extension choices are presented for the Multi-Master milling heads.

A single tool replaces the roughing and finishing endmills; therefore lowering stock.

Tool change and setup time can be discarded.

An extra tool position is achieved on the machine

New Chip Splitting Solid Carbide Endmills for Increased Metal Removal Rates

ISCAR is introducing the ECP-3/4L family of chip splitting endmills. The revolutionary endmills are offered with 3 and four 38 degree flutes in grade IC900. They feature 2xD and long shanks with decreased neck diameter, which facilitate machining along high shoulders, at high feeds. These endmills, due to their chip splitting factor and force distribution can be used very effectually on reduced power machines (CAT40/BT40/ISO40). The serrated cutting edge incorperates flat peaks which leave a enhanced surface finish, in comparison to the current rougher carbide endmills. The ECP endmills are endorsed for machining austenitic and martensitic stainless steel, at up to 2xD depth of cut. They can be utilized on alloyed steel as well. All of the preliminary tests conducted at many customers' locations showed remarkable results.

New Cutters And Carbide Insert Arrangements From Iscar To Better Maximize The Machining Procedure
Iscar is introducing Penta 34 carbide inserts with a new PB chipformer. The PB chipformer features a single cavity with a positive rake, neutral shoulder angle, and a honed edge. It is actually a C-type chipformer with a different frontal edge.

A Number Of Improvements Have Broadened Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

A Couple Of Advancements In Carbide Inserts From Iscar From Over The Years
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

Iscar Adds Their Latest Innovations To A Long Line Of Effective Hole Making Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

Iscar Releases A Brand New Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Push Pull Testing For Construction Industry Supplying Calibrated Gauges. Stress Load Testing Procedures For On Site Evidence To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

What Exactly Vehicle Engineering Careers Do.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.