Iscar Adds Their Latest Innovations To A Long Line Of Effective Hole Making Solutions

Iscar recently released a number of different drilling innovations to meet their customers needs. These recent products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with fresh and innovative ways to boost productivity for the customer. Here is a little bit about these new products, and how they will benefit the end user of these drills.

SUMOCHAM Drills

ISCAR's new SUMOCHAM drill family is an advanced evolution of the extraordinarily thriving CHAMDRILL and CHAMDRILLJET drill families. The drill features twisted coolant nozzles with indexable drilling heads which are available in different head configurations for various material groups. SUMOCHAM drills can be used on milling centers or lathes.

SUMOCHAM includes four different standard drill head geometries, designed for unmatched performance and high dependability. The drill head is manufactured with a sharp cutting edge and polished flutes. SUMOCHAM drilling heads are obtainable in the diameter range of 8 to 25.9 mm. The drill head has ground flutes for smooth, continuous chip flow and a ground gash for improved penetration.

The drill shank design is in accordance to DIN 9766 standard, with available drilling depth to diameter ratios of 1.5XD, 3xD, 5XD and 8xD. All drill bodies feature coolant through holes. The accurate cylinder added to the clamping portion increases durability and decreases internal stresses. The rotation stopper planes are precision ground, which increase the control on the drilling head position and support, increasing tool performance and life. ISCAR's innovative SUMOCHAM drill line will furnish longer tool life and greater productivity.

DR-DH Deep Drills

DR-DH drills can accomplish drilling depth-to-diameter ratio of 7XD and up. Designed to be employed on standard horizontal milling centers, turning, and multi-task machines. Use of additional machine and setup can be avoided. They will be obtainable as semi-standard item in a diameter range of 25.4 to 69.5 mm (1.00 - 2.73").

Two versions will be available:
A Single Flute DR-DH-31.65-0350NC-2FS is a very rigid tool that has a patented chip gullet design. It was built for easily cut materials comparable to cast iron and low alloyed steel.

A Double Flute DR-DH-31.65-0350NC-2FD has a double chip gullet for enhanced chip flow. It was designed for drilling gummy materials like non-alloyed steel and high temperature alloys.

ISCAR DEEP HOLE DRILLS

With ISCAR's brand new solid carbide deep hole drills, you can easily drill up to 22 times diameter and reach bottom10% faster than with other solid carbide drills - and six times faster than a HSS drill. This ability can speed up several high-volume operations. The deep-hole drilling station no longer needs to slow down a transfer line or stop it entirely because a drill breaks.

Other target applications encompass deep holes for automotive, hydraulic blocks and die & mold work. A aggregate of features assist the twist drills to cut faster, straighter,deeper, last longer and expel chips more surely. A unique high-strength core creates a more durable drill point and allows for deeper flutes, enlarging the departure path for chips.

The drill tip itself has a 140 positive-point, four-margin design to maintain the edge, diminish thrust forces and aide centering and tracking. A post-coat polishing step on the flutes, margins and cutting edges reduces friction and torque that can readily snap a drill.

The new drills are found in standard diameters ranging from 5 to 10 mm, in 20 and 22 length to diameter ratios. Special sizes are available on request. All are manufactured of IC908, a 10% cobalt submicron carbide grade, and comes with a TiAlN PVD coating, and can be refurbished.

These are just some of the latest innovations coming from Iscar.

Iscar Releases A Brand New Line Of Slitting Cutters Applying Tang-Grip Technology And The Strength Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the added durability of the new Sumo Tec insert grades. The concept, already proven successful in Tang-Grip parting tools, has now been extended to slitting cutters.

Iscar Recently Releases Numerous Original Lines To Extend Their Family Of Milling Tools
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

A Number Of Improvements Have Broadened Iscar's Families Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

The Latest In Carbide Endmill Designs In A Extensive And Prosperous Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Brand New End Mills From Iscar Can Enhance Productivity While Decreasing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Push Pull Testing For Construction Industry Supplying Calibrated Gauges. Stress Load Testing Procedures For On Site Evidence To Testing Standards.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

What Exactly Vehicle Engineering Careers Do.
Automotive engineers who have years of experience in the automotive industry have the ability and skills of overseeing new projects and product development.